This easy to use and read tool allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 lb. spec.
Instructions:
- 1. Position the small O-ring over the 10 lb. mark.
- 2. Position the U-shaped belt cradle against the bottom of the belt at a 90 degree angle and locate the large O-ring to a reference point, record reading.
- 3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, difference in the reading is the belt deflection (refer to service manual for spec.).
Item #
1811456
Brand
OTC Tools
Manufacturer's Warranty
not available
Shipping Weight
not available
Product Type
not available
Dimensions
0.00" L x 0.00" W x 0.00" H
