U-POL 2K HS Build Gray Primer 4:1

SKU #1807919
$31.99–$88.99
• Can be used for spot repair or large panels
• Excellent build
• Easy to sand
$31.99

High Build Primer - Gray

If you are on the project of restoring an old car, then bring in the U-Pol 2K HS Build Gray Primer 4:1 This high-build formula works exceptionally well for spot repairs and fills in minor imperfections with ease. While it improves adhesion of the top-coat, it also enhances the appearance of the surface on which it is applied. Specifically designed to cover large areas, this primer can be used in the ratio of 4:1:1 reducer.

A high-build primer is a usual necessary step after self etch priming. A high build primer is usually used to remove imperfections by adding a comparatively thick coat of paint. This primer has excellent surface leveling properties and builds a film that works perfectly well for spot repairs. While using the primer at door edges ensure that there is no extra paint build-up or they will be prone to chipping.

The U-Pol 2K HS Build Gray Primer 4:1 provides a fast drying finish that allows better edging while providing smooth and rust resistant surface. This ensures the uniformity in top coat.

This wet on wet sealer is best used in the ratio of 4:1:2 reducer. While it is easy to sand, it manages to give a perfect gloss holdout. The primer can be low baked, air dried or I.R.cured. The one gallon can is tintable with up to 10% urethane mixing base.

Preparing the Surface for the Primer:
  • You will need to use a pre-cleaner or panel prep to degrease while allowing it to dry.
  • The surface must be abraded. For Original Paint, use Wet sand P320 or Dry sand P280. For Bare Metal you may have to abrade with P180. (Aluminium and for zinc coated steel Coat with 1-2 light coats of ACID #8 1K etch primer. Allow 20 minutes drying.)
  • GRP, SMC, Glass fibre, Polyester Filler: Dry sand P240. E-coat: UP2252 is suitable for direct application to unabraded E-coated panels.
  • Use a System 20 Degreaser for degreasing.
  • When dry sand down primer, wet sand P800 or Dry sand P320, repeat Step 1. Apply basecoat and clearcoat e.g. S2083.
Key Features of the U-Pol 2K HS Build Gray Primer 4:1
  • Levels surface evenly by building an excellent film over the surface
  • Hides imperfections well and provides better opacity
  • Sands easily and provides better gloss holdout
  • Primer that covers a large surface area
  • Apply to metal surface directly
  • Available in 1L or 1 gallon cans

WARNING WARNING: This product can expose you to Ethylbenzene a chemical known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.

• Can be used for spot repair or large panels
• Excellent build
• Easy to sand

We've neatly tucked away all of the important information on your new purchase, from assembly instructions to how-to-use videos to warranty information.
Technical Data Sheet

Safety Data Sheet

" target="_blank">
Tech Sheet1

Item #
1807919
Brand
U-POL
Manufacturer's Warranty
not available
Shipping Weight
not available
Product Type
not available
Dimensions
0.00" L x 0.00" W x 0.00" H
New Customer Promo
New Customer Promo